These industrial burners dual fuel KTPBY.. with pneumatic atomization of the liquid fuel and electronic operation, have been designed for all those applications in which monoblock models are poorly suited or entirely inadequate, such as wherever the power values at the firing would otherwise require the use of built-in fans of excessive size, whenever combustion air pre-heating is provided, or again, whenever the primary noise source must be shifted to soundproofed areas. The range runs from 320 kW to 4100 kW power in different constructive versions as required by the type of final system or specific client needs. This industrial burner design project was developed to obtain the greatest versatility in order to achieve the objectives posed by the client, and therefore in respect of the widest range of technical specifications. For example, combustion heads with air inlet from above or below the firing, axial or tangential air flow. This means that the machines can be personalised as required by size and performance in different industrial sectors that offer differ widely one from another. All the combustion heads are obviously available in the versions for heavy oil. All the burners are available for oils with viscosity up to 4000 cSt at 50 °C (530 °E at 50 °C). Personalisation in these cases is almost inevitable and entirely feasible with our range, and all such requests are carefully analysed, one by one. Each system can be further distinguished by the equipment provided:
Download the technical documentation of this product in .PDF format . In order to receive the instruction manual, please request from CIB UNIGAS through the free registration form .
Enter here to see our references.
Download here CIB UNIGAS technical literature in PDF format. In the same section you will also find the order form.
Find the nearest Cib Unigas Agency by selecting your Country!
The future, Today